For Whom the Toilet Flushes

Boilers are made of metal, but they spend their working life with constant water and oxygen exposure. These are the elements that lead to corrosion problems, which is a major issue a boiler faces.  1. Heat Exchange Failure The heat exchanger at the bottom of the boiler is responsible for keeping the water inside at the desired temperature. As a metal component, it is very prone to corrosion. Once the damage becomes severe, the heat exchange fails and the water will no longer heat up properly in the tank.

If you are careful to check your drainage system regularly, you can notice some telltale signs that can alert you of an expected drainage blockage. For instance, your drainage system may begin to drain slowly, or you may even realize you are using more energy to plunge your toilet. You should not ignore such problems because they indicate a drainage blockage that may later turn into a plumbing emergency. Typically, most serious drainage blockages don't just happen; they start small and then escalate over time.

When it comes to installing a gas line, most people think of indoor appliances. Furnaces, dryers, gas ranges, and so on can all enjoy natural gas's cost and efficiency benefits, but they aren't alone. Many people also use natural gas to fuel outdoor appliances, such as gas grills, pool heaters, or whole-house generators. Running a gas line to an outdoor appliance is similar to indoor installation, but there are some critical differences.

1. System Design Not all AC units are created equal when it comes to smoke. Central AC units are preferred over window units. Window units bring outside air in directly, passing it through only one mediocre filter. This means a window unit can only filter out the largest of smoke particulates and there will still be a lot of smoke residue in the air coming into your home. If you are installing a new AC system, opt for a central air conditioning unit or a mini-split ductless system.

Your home's hydronic heating uses a semi-closed system. Under normal operating conditions, water shouldn't enter or leave, although system pressure will vary with temperature. Since water expands as it heats up, an expansion tank prevents the excess pressure from overloading the system and causing leaks or other damage. As a result of this design, conspicuous pressure drops are usually a good indication that something is wrong. If you've noticed your pressure dropping or your other issues with your heat, your system might be leaking.

If your foundation is cracked or sunken, there could be a water problem under your house. Poor drainage and too much water are common causes of foundation damage. Excess water could be coming from a plumbing leak under the slab. This might be due to a constant leak from a water pipe or an intermittent leak from a drain. Here's a look at what a foundation repair contractor might do to repair your foundation when the cause is a plumbing leak.

Does your home have a clog in your residential sewer line and you need to figure out how to clean it out on your own? These tips will help you get the job done with a sewer snake Get The Right Tools The secret to cleaning a residential sewer line is to use a sewer snake, which will help cut through the clogs that are preventing the water from flowing into the sewer.